• 黄桃视频APP在线看黄,黄桃视频APP在线看污,黄桃视频APP破解版,黄桃视频APP苹果下载

    Hello, Welcome to FCTEL Technology Co.,Ltd
    National service hotline:+086 0571-87007055/56/57 CN

    WE ONLY FOCUS ON TRANSMISSION AND ACCESS

    Products center

    Industrial rail 1 port Profibus-DP Multiplexer

    Type:FCP-P1G Message

    Description:This series of equipment using large FPGA design using the original technology can support a channel Profibus-DP to fiber optic repeater communication rate 0-12Mpbs. IP40 protection grade wavy aluminum reinforced case 35mm DIN rail mo

    Product Description
    This series of equipment using large FPGA design using the original technology can support a channel Profibus-DP to fiber optic repeater communication rate 0-12Mpbs. IP40 protection grade wavy aluminum reinforced case 35mm DIN rail mounting AC & DC (9~55V) wide power input power supply redundancy and isolation protection. -40~75°C operating temperature range able to meet the requirements of various industrial sites providing convenient fiber optic communication solutions
    Functional Properties
    The device is used in pair the signal input terminal a signal output terminal; 
    ◈Provide 1 Profibus DP field bus communication baud rate adaptive 9600-12Mbps; 
    ◈Multimode/single mode fiber optional multimode can transmit 2KM single mode can transmit 20-120KM ST/SC/FC interface is optional;
    ◈With signal fault protection function; omnidirectional display of electrical interfaces and fiber operating conditions
    ◈Profibus DP interface anti-radar to IEC61000-4-5 (8/20μS). Differential mode: 6KV impedance (2Ω); Common mode: 6KV impedance (2Ω) standard;
    ◈Support wide range of 9-48V AC and DC input support internal isolation redundant dual power input power supply overload protection anti-reverse protection；
    ◈Meet the industrial four-level electromagnetic compatibility requirements;
    ◈Super lightning protection function: lightning protection anti-induction high voltage anti-surge etc；
    ◈Fanless efficient heat dissipation reducing repair time；
    ◈IP40 enclosure protection level can withstand the harsh environment；
    ◈DIN 35mm rail or wall mount；
    ◈Wide temperature type: working temperature -40 ° C ~ +85 ° C；
    Technical Parameters
    ◆Fiber optic      
    Optical port: 1
    Optical fiber: single fiber and dual fiber
    Fiber Interface: FC/SC/ST/LC (SFP)
    Wavelength: 850nm/1310nm multimode; 1310nm/1550nm single mode
    No relay transmission distance: 20~120Km
    Typical transmit power:
        Single mode 1310/1550nm: ≥-9dBm
        Multimode 850nm: -18dBma
        Multimode 1310nm: -25dBm
    Acceptable sensitivity range: -28dBm~- 40dBm
    ◆Profibus DP interface   
    Standard：Support Profibus DP standard
    Rate：9.6kBit/s、19.2 kBit/s、45.45kBit/s、 93.75k kBit/s、187.5kBit/s、500kBit/s、 1.5MBit/s、6MBit/s and 12MBit/s.
    Physical interface： 9-pin D-Sub jack connector with pin definitions in accordance with Profibus DP protocol specifications
    Rate setting: 9600-12Mbps/s automatic identification
    Signal delay (electrical port): ≤11Bit
    Terminal resistance: This unit does not have a terminating resistor please connect as needed
     ◆Working environment   
    Working temperature: -40℃—+85℃
    Storage temperature:  -40℃—+85℃
    Working humidity: 0%—95%（no condensation）
    MTBF：   ＞100000 hours
    Application Scheme




    
    网站地图